The new PLA Recreus filament for 3D printing presents high-end printed parts .The new formula is less brittle than common PLA and allows higher impact resistance. The RECREUS PLA is really easy to print, low oozing allow to achieve very clean printed parts without post-processing.
- Diameter tolerance +/- 0.03mm
- Excellent mechanical properties.
- High interlayer adhesion.
- Heat-bed temperature 45-60ºC. You can use 3DLAC or similar adhesives.
- Low oozing
- Diameter Doble check during filament production and winding process (avoid fail prints due to blobs or clots)
- New winding process 100% knot-free.
- Layer Height: 0.08-0.3 (for 0.4mm nozzles) Optimum results 0.15mm
- Speed: 15-140mm / s. Optima 35-45 mm/s
- Temperature: 190-210 Celsius. Optimun 210 C
- Retraction Speed: 25-160mm / s
- Retraction Length: 2.5-6.5mm (óptimun 2.5mm)
- Travelling speed: 120-180mm/s