PP3D BLACK 1.75MM 600gr.
PP3D BLACK 1.75MM 600gr.


High impact, chemical resistant, durable and very easy to print advanced polypropylene filament incorporating a fixing 'primer' to apply before printing.

  • Chemical resistant
  • Easy to print
  • Made in the EU
  • Black
  • Natural
  • 1.75 MM
  • 2.85 MM
  • 600 GR

Share it!

The PP·3D polypropylene filament has been developed jointly with the multinational Repsol This synergy has made it possible to launch a high-quality polypropylene thanks to its high degree of experience in Polyolefin manufacture.

The filament is accompanied by an adhesion 'primer' to apply on the surface of the printer before printing, and that can be used in several applications. This results in the maximum adhesion of the PP at just 40°C (on a glass bed; adhesion will be less on other surfaces) and, therefore, an optimal result without any warping or deformation! To remove any glue residue, just clean the printer bed with Sanytol or acetone.

The PP·3D has exceptional resistance to fatigue, high levels of toughness, a low friction coefficient and is non-toxic. Its finish is impressive, similar to injection, which makes the appreciation of the union between layers disappear, resulting in a piece of very high quality and exceptional finish.


PP·3D is a material with great applicability in many sectors. Suitable for food contact and autoclaving (natural colour only). It is an ideal material to create:

– Bottles and containers as functional or end-use prototypes that require sealing to contain a liquid product.

– Mechanical components, tools and industrial parts with high electrical resistance.

– Parts that must be resistant to salts, acids, solvents, fats and oils.

– Parts that require low friction and resistance to heat.

Printing temperature
Print speed
40 mm/s.
Diameter tolerance
0.03 mm.
Layer height
0.2 mm.
Bed temperature
40°C once the 'primer' has been applied.
Retraction speed
40 mm/s at a distance of 3.2 mm (for printers with direct extrusion) and 25 mm/s at a distance of 6 mm (for printers with Bowden type extrusion).
Minimum nozzle diameter
0.4 – 0.6 mm.
16 Items

Customer Photos

star star star star star

Great for complex print in PP

Tested the material for small and medium parts. Behaves great with both. The surface finish is very good and it's easier to print than many other products on the market.
Glue works good but for very big parts I'd recommend something stronger.
All tests were made on Delta WASP printers with Flex extruder.
Definetely recommended.

Thank you very much for your feedback, Giulio! We value it greatly :)

We also recommend that you consult

Customers who bought this product also bought: