Filaflex 70A
Filaflex 70A

Filaflex 70A

Filaflex 70A, 'Ultra-Soft', ist ein hochelastisches und fortschrittliches Filament aus der Filaflex-Reihe für 3D-Drucker.

  • Shore-Härte 70A
  • 900 % Dehnung
  • Sehr hohe Elastizität
  • Beständig gegen Lösungsmittel, Treibstoff und Aceton
  • Geruchsneutral
  • Kein heißer Drucktisch erforderlich
  • Hergestellt in der EU
209,90 $
Farbe
  • Schwarz
  • Weiß
  • Transparent
  • Nude
  • Rot
  • Navy blau
Durchmesser
  • 1.75 MM
  • 2.85 MM
Gewicht
  • 500 GR
  • 3 KG

Teilt es!
 

Filaflex 70A, 'Ultra-Soft', ist ein hochelastisches TPU-Filament (Thermoplastisches Polyurethan), das in seinen Eigenschaften mit Silikon vergleichbar ist. Es hat eine Shore-Härte von 70A und erreicht bis zu 900 % Bruchdehnung. Sein Hauptvorteil ist, dass er nach dem Dehnen in seine ursprüngliche Form zurückkehrt, ohne sich zu verformen oder zu brechen. Filaflex 70A ist nicht für All Metal Hotend geeignet, da das Filament stecken bleiben und nicht richtig fließen kann. Wenn Sie jedoch Zweifel haben, fragen Sie uns und wir werden Sie beraten.

Die Filamente der Filaflex-Reihe zeichnen sich durch ihre große Haftfähigkeit auf dem Drucktisch aus, so dass sie keinen heißen Tisch, kein blue tape, kein Kaptonband, keinen Lack und keine anderen Sprühkleber benötigen. Darüber hinaus sind sie geruchsneutral und beständig gegen Lösungsmittel, Aceton und Treibstoff. Beim Drucken sind andere Vorgehensweisen erforderlich als bei starren Filamenten. Dazu muss der 3D-Drucker entsprechend konfiguriert werden.

Anwendungen

Filaflex 70 ist ungiftig und der Hautkontakt ungefährlich. Für medizinische oder lebensmitteltechnische Verwendung ist eine konkrete Nachfrage vonnöten. Es können damit Stücke, die eine hohe Elastizität erfordern, kreiert werden, wie:

– Einlagen: orthopädische Einlagen.

– Prothesen und Organmodelle: Prothesen von Armen, Händen, Organen zur Simulation von chirurgischen Eingriffen,...

– Objekte und flexible Bestandteile für die Industrie, Automobilherstellung: Stoßfänger, Gelenke, Reifen, Greifer...

– Textilteile und Accessoires: Bekleidung, Stoffe, Bedrucken von Kleidungsstücken, Taschen, Ohrringe,...

– Schuhe: Sohlen, Schuhe, Sandalen, Hausschuhe,...

Drucktemperatur
215-235°C.
Druckgeschwindigkeit
20-40 mm/s.
Durchmessertoleranz
0.04 mm.
Schichthöhe
0,08-0,3 (für Düsen von 0,4 mm) Optimale Resultate bei 0,2 mm.
Rückzugsgeschwindigkeit
35-55 mm/s bei einem Abstand von 2,5-6 mm.
Travelling speed
160-200 mm/s.
Shore-Härte
70A
100 Artikel
Käufer-Bewertung
star star star star star_border
03.11.2022

Good Filament

It's a good filament and can be printined on a Prusa i3 Mk3S at 20 mm/s. It's *extremely* tear resistant. Don't heat the PEI bed and maybe use Kapton tape, else it will be nigh impossible so separate.

However, 1 star is lost due to claiming it being resistant to acetone and solvents. I'm really a bit confused here, because it actually dissolves really happily in acetone and even ethanol. Can be a good thing though, if you accidentally welded it to your build plate...

Antworten:
Thank you very much for your rating and feedback. It is a great help for other users and for us. We are glad to hear that you were able to print this Filaflex Shore Hardness on your Prusa i3 Mk3S at 20 mm/s. Thanks for your advice, as it will be very useful to other users of this printer. About the resistance to acetone, you are partly right because acetone does not degrade the material in the short term, but with an exposure longer than 3 weeks and at room temperature, it can cause swelling and tensile stress problems in the material. We will correct this information on our website so that it does not cause confusion or problems. Thank you very much for your comments! :)

Wir empfehlen Ihnen auch, Folgendes zu konsultieren

Kunden, die diesen Artikel gekauft haben, kauften auch ...