Note 
star star star star star_border
Ricardo V 17/08/2023
star Acheteur vérifié

Color seems to make a difference

It is a good filament very stretchy and resistant to tear with high elasticity, very difficult to deform permanently without heat.
The problem I have is it's tendency to clog and the need to constantly clean the gears of my extruder. It also has a very high humidity absorption.

All of this problems are explained by the company the only issue I have noticed is that the skin colored filament clogs frequently and it has been imposible to use. I have no issues with transparent and black

  • 1 personne(s) sur 1 ont trouvé ce commentaire utile.
Note 
star star star star star
Virtuarch studio 10/08/2023

Blanco mate para un acabado inigualable

A lo largo del tiempo hemos probado muchos PLA distintos, pero después de probar este blanco mate de Recreus nos hemos enamorado. De impresión muy fácil, y con un acabado muy bonito y fino, nos viene al pelo para imprimir las maquetas que necesitamos en el estudio. Muy recomendable!

Note 
star star star star star
Santo Gagliostro 10/08/2023

Buon filamento molto morbido e resistente e neppure troppo diffi

Buon filamento molto morbido e resistente e neppure troppo difficile da stampare con i soliti accorgimenti tipici dei filamenti flessibili. Usato per stampe funzionali in contato con acqua calda e detersivo. Sono soddisfatto.

Note 
star star star star star
Key L. 09/08/2023

Great filament!

Reciflex is a very good flexible filament. I am very happy to be able to use a flexible material, that is recycled, thus reducing my impact on the planet. The 3D printed fabric is surprisingly durable and has an enamel-like texture. Great filament!

  • 1 personne(s) sur 1 ont trouvé ce commentaire utile.
Note 
star star star star star
Gustavo 04/08/2023

Valor añadido!

Me encanta el potencial que tiene este material y su color. Puedo imprimir objetos que casi se comporten como una planta para ponerlos en las estancias de mi casa.

Note 
star star star star star
Mark 03/08/2023

A good choice

The material is truly easy to print! The average resistivity is about 5.5 KΩ for 100mm 1.75mm filament, so the electrically conductivity is good (even if not good as some graphene loaded filaments.)

  • 1 personne(s) sur 2 ont trouvé ce commentaire utile.
Note 
star star star star star_border
TheYear2525 31/07/2023

Good Filament

It's a good filament and can be printed on a Prusa i3 Mk3S at 20 mm/s. It's *extremely* tear resistant. Don't heat the PEI bed and maybe use Kapton tape, else it will be nigh impossible so separate. However, 1 star is lost due to claiming it being resistant to acetone and solvents. I'm really a bit confused here, because it actually dissolves really happily in acetone and even ethanol. Can be a good thing though, if you accidentally welded it to your build plate...

Note 
star star star star star
Konrad 27/07/2023

Crazy good filament!

I bought this filament a week ago and when I first tried to use it with my Prusa i3, it got stuck inside of the extruder gears. But when I lowered the tension of the gear and placed it by hand into the PTFE tube, it worked perfect! This is how I think of really flexible filament! Great!

Note 
star star star star star
Peter 26/07/2023

Splendid !

We are currently testing out the material for various industrial applications and have to admit that this is a splendid material. Nice prints, Superb layer adhesion, fantastic finish.

Note 
star star star star star
BatEl H 23/07/2023
star Acheteur vérifié

Perfect

Great filament. The shipment arrived quickly and the prints came out in quality just like virgin material. Thank you!!!

  • 1 personne(s) sur 1 ont trouvé ce commentaire utile.
Note 
star star star star star
Meedak 20/07/2023

Unique

Really enjoyed learning to work with this stuff. Once you master it, it really expands what you can do with 3-D printing via FDM. Anti vibration padding, gaskets, insoles, anti slide pads, living hinges and more. Print it slow (3mm/s bambu studio/ orcaslicer), 230c, and no heat on the bed. Retraction isn’t needed and you’ll want to back off the extruder tension spring. If you’re using a bambu lab printer, you’ll probably want to drill a hole in the housing so you can continue to loosen the tension screw the appropriate amount.

  • 1 personne(s) sur 1 ont trouvé ce commentaire utile.
Note 
star star star star star
Manuel 17/07/2023

PLA con grandes propiedades

Las impresiones quedan geniales al igual que el PLA estándar, y el color mineral es realmente genial. Sin duda una gran apuesta para impresiones decorativas y dispositivos de interior.