Conductive Filaflex TPU filament is an electrically conductive flexible filament, ideal for manufacturing electrically conductive parts or components and for creating wearable devices.
Conductive Filaflex TPU filament is a electrically conductive flexible filament with a shore hardness 92A, designed for the manufacture of electrically conductive parts or components and ideal for the creation of wearable devices. Thanks to its 92A shore hardness, it is compatible with 90% of the 3D printers on the market. It provides two of the most coveted properties in 3D printing: elasticity and conductivity.
For accurate information regarding its electrical resistance, we recommend contacting our team. It's important to note that the resistance may vary depending on the printing process used.
To successfully use Conductive Filaflex filament in electronic applications, the electrical resistance of the circuit must be considered and it must take into account that this filament is designed for low current applications.
To print with this electrically conductive TPU filament, there is no need to use a hardened nozzle. In addition, Filaflex Conductive is a completely safe, flexible and conductive filament that will not damage the printer. However, to keep it in good condition, we recommend cleaning the nozzle very well after printing with this filament. This will remove any sediment that may have remained in the hotend. For this, another material such as PET-G can be used. Check out more information on hotend maintenance and repair and other recommendations.
Applications
Conductive Filaflex TPU filament has countless applications. It can be used to:
Excelente material, tanto por sus propiedades mecánicas como conductivas. Felicitaciones!
Recomedación de comprathumb_upYes
Rating
starstarstarstarstar
Mark
2023-08-03
A good choice
The material is truly easy to print! The average resistivity is about 5.5 KΩ for 100mm 1.75mm filament, so the electrically conductivity is good (even if not good as some graphene loaded filaments.)
Recomedación de comprathumb_upYes
Conductive Filaflex
* Required fields
Write your review
By submitting this review, you agree that it be published and publicly available.
Polypropylene filament with glass fiber is a composite material that combines the properties of both materials. The result is a filament that is easy to print, light, resistant to wear and tear as well as bending and tensile strength, with very good interlayer adhesion and low shrinkage deformation.
High mechanical and flexural strength
Resistant to...
PTFE (Teflon®) tube for 2.85 mm filament, which will allow you to print the most flexible filaments on your Ultimaker.
Suitable for 2.85mm filament
Reduce clogging
Improves slip
Avoid slack
Reduces friction
Allows printing with the lowest shores
Print with the most popular filament used in 3D printing, without sacrificing quality. Get very easy, fast prints from any printer.
Matte finish
High quality
Made in the EU
PLA-LW (Light Weight) by Recreus is a light weight PLA filament ideal for quick creations of low density with which you will be able to reduce the weight of your printed parts by up to 50% compared to the conventional PLA.
Light weight
Low density
Material that spreads farther
Easy to print
Resistant and less brittle
Great surface finish
Matt finish...
Filaflex 95 Foamy is a flexible TPU filament that uses dynamic foaming technology to print lightweight elastic parts with reduced weight and density and a Shore hardness of 95A. Moreover, you'll be able to print 30% faster than with any other.
Flexible TPU filament
Elastic and lightweight parts
Shore hardness from 95A to 70A
Dynamic foaming technology...
Pack Filaflex, discover all the printing possibilities with the complete Filaflex range. With the sample pack of the entire Filaflex family, you will be able to test all Shore hardnesses (60A, 70A, 82A and 95A) of our star TPU filament brand, and thus check which of them best suits your project or application.
Odourless
No hotbed required
Made in the EU
Sample pack of Filaflex 95A, which allows you to experiment and test the elasticity and Shore hardness with the best option in the Filaflex range to get familiar with TPU filament. With this sample pack of Filaflex 95A 'Medium-Flex', you can easily test and print the filament in various shades. You have two options, either choose the 'monochrome' pack,...
Balena.Filaflex is a next-generation fully circular 3D printing filament that merges Balena's BioCir®flex3D material with Recreus's renowned expertise in flexible 3D printing. Designed specifically for visionary, sustainability-focused 3D printing experts, this filament empowers creators to push the boundaries with circular, flexible materials.
Shore...
TPU Filament Filaflex 70A, 'Ultra-Soft', is a highly elastic and advanced filament from the Filaflex range for 3D printers.
Shore hardness 70A
900% stretch
Very high elasticity
Odourless
No hotbed required
Made in the EU
The TPU filament Filaflex 95A, 'Medium-Flex', is the perfect flexible filament for beginners in flexible printing. It is a semi-flexible filament, compatible with all 3D printers on the market, including bowden-type extruder printers (with tube)..
Shore hardness 95A
500% stretch
Medium elasticity
Compatible with all printers
Odourless
No hotbed required...
gb 
es
fr
de
it
Muy buena calidad
Excelente material, tanto por sus propiedades mecánicas como conductivas. Felicitaciones!