it 
es
en
fr
de
Your cart
Non ci sono più articoli nel tuo carrello
Riepilogo recensione
4.9
(37 Recensioni)
I ordered from USA and the product arrived under 1 week with free shipping. The 95A is perfect for what I needed. Firm rubber which I use to pad a bump stop on our bike rack systems. Pretty happy to see it working. I print on a Bamboo Labs P1S and set the retraction to the recommendation for Filaflex and it prints perfectly! No stringy fingers between parts.
Es un filamento fácil de imprimir y muy ligero si lo imprimes con bajo flujo, yo al principio he tenido problemas con las retracciones por no leer las recomendaciones,
sobretodo de velocidad de desplazamiento
Lo he usado para hacer soportes de unas placas solares en una Camper. Hay que ver el desempeño pero pintan muy bien. No se agrieta en piezas grandes como el ASA o ABS. La unión entre capas es muy buena, parece hecha con inyección y además aísla de las vibraciones.
Muy buen filamento para conseguir ligereza y flexibilidad, fácil de imprimir y con un acabado suave y esponjoso. Permite crear piezas densas sin aumentar mucho el peso de la pieza.
Estamos diseñando un UAV para una competición y este material es justo lo que buscábamos para el carenado. Hemos obtenido muy buen resultado siguiendo las recomendaciones del fabricante.
Agradecidos desde Xtra2 UPV :)
Saved us a fortune and many headaches
We manufacture small linear actuators that work on a unique principle. They require a dampening plug that we used to make of 1/4" EPDM cord.
However, due to change of molds, we now need 6.7 mm diameter instead of 6.35. And since that's non-standard and the manufacturers are unable to produce that material to the millimeter, we were unable to source it anymore - anywhere.
So we printed them instead. We reached the required flexibility by having a hole in the plugs. The best thing is that it printed perfectly with a QiDi iFast with Recreus' recommended paraments and loosening the extruder tensioner.
Even better was that we put that plug through 800,000 impacts inside an actual actuator and it emerged with exactly the same properties. No delamination, no change of Shore hardness. And that on our first try!
- 1 di 1 persone hanno trovato utile questa recensione.
I don't have a lot of 3D printing experience, but I have been able to get some very nice super-flexy prints of a product shell at 0.8mm thickness around the outside with this using a Ender 3 V2 with a Sprite Pro direct drive extruder.
I had slow the speed to 10mm/s and I'm using 240c temp and 0.32 layer height. The transparent also has a nice shiny Fresnel lens appearance.
My application for the 60A Filaflex has involved relatively thin builds. As such, I was looking for creative ways to easily remove the filament from the print bed, yet not alter the structure of the print, upon removal. I tested many bed surfaces, ranging from parchment-type baking papers to aluminum foil. The best surface I have found is simple silicon baking sheet...(German Silicon with .4 mm thickness).
- 1 di 1 persone hanno trovato utile questa recensione.
I had to modify my feed into the extruder as it has high friction on bundle tube . But an amazing product when tuned in to the machine. Very flexible & the layers bond really well so can be put under stress with on faults showing.
Un filamento realmente fácil de imprimir que se adapta tanto a piezas mecánicas como a figuras orgánicas y que estamos empezando a utilizar en muchos casos como sustituto del ABS. Presenta unas propiedades mecánicas similares al ABS pero con mucha más adherencia entre capas y por nuestra experiencia mucho menos propenso a las deformaciones y al warping, eso si, recomendamos su uso con cama caliente a 70º. Lo hemos testado usando una boquilla estándar de 0,4 y también con boquilla 0,6mm dejando unos acabados muy finos en los dos casos. Los soportes se retiran con mucha facilidad ya que no se resquebrajan como con el ABS y esto se traduce en una reducción significativa de los tiempos de postprocesado. Lo hemos probado con figuras orgánicas con grosor de capa 0,2mm y deja unos acabados realmente finos, mientras tanto en piezas mecánicas tampoco palidece, les otorga un equilibrio entre dureza y flexibilidad que para muchas aplicaciones es ideal. En cuanto al proveedor, destacaremos la agilidad, la profesionalidad y el trato cercano con el cliente, son estupendos. Puntuación máxima tanto para el producto como para la empresa.
ShoreA75 without changing the hardware!!
Soft prints, no headaches. Before this filament I used filaflex 70 it was good and probably more durable but I had to modify my printer print slower, and do a lot of maintenance.
With this I get the softness I needed the extruder can extrude faster and the print quality is always the same.
I use it to do custom insoles for shoes and the time I save with foamy is a game changer.